4
Warning
• Only use suitable charging devices or USB connections forcharging.
• As arule,donot use charging devicesorUSB connections that aredefective anddo
not try to repair themyourself.
• Put your terminal device on theinductivecharger (B) with thebacktothe charger.
• Charging starts as soon as an effective induction eld has been generated.
• The green status LED (2) is constantly lit when charging is in progress.
• The current charging status appears on your terminal device.
• If no connection canbeestablished through induction, you may have to changethe
position of your terminal device (B).
• Chargingstops automatically once your device’sbattery is fully charged.
• When charging is complete, the statusLED (2) goes out.
• Remove your terminal device from the inductive charger and disconnect the charger from
the power supply.
5. Care and Maintenance
Only clean this productwith aslightly damp,lint-free cloth anddonot use aggressive
cleaning agents.
6. Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and providesnowarranty for damage resulting
from improper installation/mounting, improper use of the product or from failuretoobserve
the operating instructions and/orsafety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questionsabout this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
To Next Page
Loading...
Need help?
General
