Hama Multi User Manual

7
4.2 Suction cup holder
• Remove the protective lm from the suction cup.
• Open the locking lever on the suction cup (B).
• Position the holder with the suction cup on aclean, even mounting surface (e.g. windscreen)
• Lightly press the holder onto the required installation surface and close the locking lever to securethe
holder in place.
• After installation, always check that the suction cup is secure.
• To release the suction cup from the installation surface again, open the locking lever.Ifnecessary,pull
gently on the tab to completely release the suction cup.
4.3 Mounting the universal bracket
• Attach the universal bracket using the locking lug on the holder (suction cup holder,grating clamp).
• Press the button on the side of the universal bracket to open the holding jaws. (C–1)
• Insert your desired device and xitinplace by gently pressing the holding jaws together.(C–2)
• To be able to remove the device easily,press the button on the side of the universal bracket. (C–1)
Note
• Always remove your device from the bracket beforeyou attach it to or remove it from the holder (suction
cup holder,grating clamp).
5. Care and maintenance
Only clean this product using alint-free, slightly damp cloth and do not use any harsh cleaners.
6. Warranty disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/
or safety notes.

Hama Multi Specifications

General

Material	Plastic
Case type	Cover
Compatibility	iPod touch 4G
Product color	-
Brand compatibility	Apple
Protection features	Scratch resistant
Carrying style	Hand (carrying), Pocket (carrying)
Waterproof	No

Weight and Dimensions

Depth	9 mm
Width	111 mm
Height	61 mm