Hama Pen - Operation and Specifications; Battery Status Indicators; Operation Guide; Power On;Off

BTST30_B09 SW2 (Volume +) +
SW3 (Volume -)
Double Press Short Press Long Press Very Long Press
(Less than 1 sec) (Less than 1 sec) (3 sec) (5 Sec)
Double Press:
Less than 1 Sec
Long Press: 3 Sec.
Very Long Press: 5 Sec.
Battery Status:
1. Battery capacity: 90mA
2. 4.0-4.2v: fully charged Blue LED Stay On.
3. While Charge and Power on, the LED indicator follow the
connection status.
4, 3.2v~3.0v: battery low: Red LED lighting 1 Seconds, 5
Seconds interval.
5. 3.0v and under: Power automatic off.
Operation Guide
BATTERY LOW INDICATION
When battery power becomes low, RED indicator LED on the
Pen will blink when battery is low. The headset will continue to
operate for a period oftime depending on usage, but batteries
should be recharge immediately.
OPERATIONS ON POWER SAVING MODE
In order to conserve battery power, the headset is is also
designed with the consideration of the trade-off between
friendly usage and power consumption. Stages of power
consumption include normal operation and idle. The idle mode
is entered immediately upon stopping using the headset for a
while. The headset will reduce current consumption gradually.
In idle mode, powers up the headset again for back to work.
POWER ON/OFF:
For the consideration of battery life purpose, this headset
designed a button at the body of the pen side, which provides
00115038man de en fr nl ru.indd 8-9
General Specifications
Compatible Standard
Support Profile
Output Frequency Range
Frequency Hopping
Bluetooth Performance
Bluetooth PIN code
Multiple-Link
Multi-Pairing
Multi-Pairing
Bluetooth v3.0
HSP 1.0, HFP 1.5, A2DP 1.2
2.400~2.484 GHz
FHSS (Frequency Hopping
Spread Spectrum)
Bluetooth v3.0 compliant Class
11, the maximum radius of 10M
(no obstacle) distance
X The amount of available
power to communicate their
performance and Bluetooth
devices, depending on the
surrounding environment.
0000
Phone Call equipment x 1,
Music-enabled devices x 1
Two Mobile Phone call standby,
can only answer one of the time.
"Multi-Pairing" support, and
have made the subsequent
pairing is useful because
once the device is recognized
only by connecting the power
supply is turned ON. can
be connected simultaneously is
one. Also, attached to the end,
priority will be selected by the
SCMS-T SCMS-T supported
Height 135+1mm
Weight 24+ 19
Troubleshooting
Common troubleshooting steps
1. If you feel the headset does not sound as usual, please
check the battery indicator on the pen or too far away from
your Bluetooth device. The wireless about 10 Meter
distance long.
2. Power off and Power on the Headset.
3. Volume up the headset incase its volume low.
4. Remember both Bluetooth side and Pen side battery and
pairing.
5. The Stylus pen rib please do not damaged, incase it's
damaged please stop use it on your touch screen anymore
for avoid damage your screen.
Registration and Safety Certification/General Information
This device bears the CE symbol as specified by the provisions
of Directive R & TTE (1999/5/EC).
Hama GmbH & Co. KG hereby declares that this device is in
compliance with the basic requirements and other relevant
guidelines and regulations of the 1999/5/EC guideline. You
will find the declaration of compliance and declaration of
conformity in the Internet at http://www.hama.com
11.01.12 07:04