10 11
SNOOZE/Backlight
Projection Light key
Rotate key
Focus key
Projector Lens
UP/Down key
SNOOZE / Backlight
Projection Light key
Continue Projection key
FLIP key
Adapter socket
ALARM keyMODE key
Wave
°C/°F
key
Calendar
To change the weekday display from one language to another language, press key for 3
seconds – the display will show the current language ( GER for German display, ENG for English
display). 1. EN for English -> 2 GE for German -> FR for French -> IT for Italian -> SP for Spanish.
Press & Hold key for 2 seconds will toggle to the other languages.
Setting the Alarm time
ALARM 1 setting
- In the ALARM 1 Display,
- Press MODE for about 3 seconds: the hour digits are blinking and can be set by pressing
or key
- Press MODE again: the minute digits are blinking and can be set by pressing or key.
- Press MODE again, the Alarm time is set and icon will turn on.
ALARM 2 setting
- In the ALARM 2 Display,
- Press MODE for about 3 seconds: the hour digits are blinking and can set by pressing
or key.
- Press MODE again: the minute digits are blinking and can be set by pressing or key
- Press MODE again, the Alarm time is set and icon will turn on.
Enable Alarm 1 / Alarm 2:
- Press ALARM will enable ALARM 1 with icon turns o
- Press ALARMagain will enable ALARM 2 with icon turns on
- Press ALARMagain will enable both ALARM 1 and
ALARM 2 with and icons to turn on
- Press ALARM again will disable both ALARM 1 and
ALARM 2 with and icons to turn off.
Activating the Alarm
When the ALARM 1 / ALARM 2 is ringing, the relative alarm icon / will be fl ashing.
- Press ALARM key to turn the alarm off.
- Press SNOOZE / LIGHT key – alarm stops and the backlight will turn on for 5 seconds with
deleted, the repeat alarm indicator (Z
z
) fl ashing. The alarm sounds again for after 4 minutes.
- If the alarm is not turned off, it will stop automatically after 4 minutes.
- Press MODE one last time: the normal time display appears.
Select 12 hour or 24 hour display format
- Press will toggle the display format between 12 hour and 24 hour.
N.B.:
1. If no key is pressed within 30 seconds, it will exit the Manual Time Setting Mode and go
back to Time / Temperature Display without the data update.
2. During any setting mode, press and hold or key for 2 seconds for fast setting
3. View week of the year, press key will toggle between the day of week- and the calendar
week.
00104952man_de_en_es_fr_nl_pl.indd Abs1:10-Abs1:1100104952man_de_en_es_fr_nl_pl.indd Abs1:10-Abs1:11 23.02.10 07:3523.02.10 07:35