Hama SIRIUM2000AMBT Quick Guide

4
Note
• To switch the loudspeaker off completely,disconnect it
from the power supply.
Volume adjustment /mute
• Press [VOLUME -/+] to reduce /increase the volume.
• Press [ ](2) on the remote control to mute the
loudspeaker.
• Press [ ](2) again to reset the volume to the level
beforeitwas muted.
5.Setting up the loudspeaker
Note
• To be able to use the product’sfull range of functions,
you must additionally download the Amazon Alexa
app and create an Amazon account. Forthis purpose,
follow the instructions in the Amazon Alexa app.
Further information can be found at www.amazon.
co.uk
5.1Downloading the Hama Smart Audio app
Note
The following operating systems aresupported:
• iOS 8orhigher
• Android 4.4.2 or higher
• Open the iTunes App StoreorGoogle Play Storeonyour
smartphone.
• Use the search term "Hama Smart Audio".
• Download the app in the usual way and install it on your
smartphone. To do this, follow the instructions on your
smartphone.
5.2First-time setup of the device with the Hama
Smart Audio app (ALEXA function)
Note –WLAN (wireless network)
• Ensurethat the router is switched on, is functioning
correctly and that thereisaconnection to the internet.
• Activate the WLAN function of your router.
• Followyour router´s operating instructions as regards
the correct functioning of the WLAN connection.
• Ensurethat the loudspeaker is in WLAN pairing mode.
The status LEDs (1-5) ash.
• Ensurethat the Hama Smart Audio App is installed
on your smartphone and that all updates have been
installed.
• Open the Hama Smart Audio app and touch
[CONFIGURE].
• Then touch [Add MoreSpeakers].
• Open your smartphone's WLAN settings by touching
[OPEN Settings].
• In your smartphone's WLAN settings, search for
the Hama SIRIUM2000AMBT/SIRIUM2100AMBT
loudspeaker.
Note
• The loudspeaker generates its own WLAN network
bearing the name SIRIUMSetup and the rst six digits
of the MACaddress. (e.g. SIRIUMSetup_E69EBB) This
WLAN does not requireapassword.
• Connect your smartphone with the loudspeaker.
• Now return to the Hama Smart Audio App on your
smartphone.
• Select the required WLAN name (SSID) with which you
wish to connect the loudspeaker.
• Now also enter your network key if necessary and
conrm with [Save].
• Conrm the selected settings by touching [CONFIRM].
• The loudspeaker now connects to the network. After
successful conguration, "Loudspeaker congured
successfully" appears on the smartphone.
• The LEDs go out after afew seconds.
Note
• With iOS, the App may need to be closed and
restarted. Then follow the two steps below.
• The sound bar that has been set up should now appear
in the main menu. Press on the loudspeaker icon.
• Tap[Sources]atthe bottom edge of the screen to
establish aconnection with your Amazon account.
• Then touch the [Amazon Alexa]button.
• Touch [Sign in with Amazon] to open the web browser to
enter your access details.
Note
• If the Amazon Shopping App has already been installed
and set up on your smartphone, the following steps
areskipped.
• Using your smartphone's keypad, enter the access
details for your Amazon account and conrm your
entries with Login.
• Alternatively,tap [Create new Amazon account]
to create anew Amazon account.
• Following successful login, you will return to the Hama
Smart Audio app.
• Now choose the language to which Alexa is to respond
in future.

Hama SIRIUM2000AMBT Specifications

General

Brand	Hama
Model	SIRIUM2000AMBT
Category	Speakers
Language	English