9
6.4 Reset
Press the RESET button (3) to restart the station. The measuring station
returns to the factory settings.
7. Care and Maintenance
•Only clean this product with a slightly damp, lint-free cloth and do not
use aggressive cleaning agents.
•Make sure that water does not get into the product.
8. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for
damage resulting from improper installation/mounting, improper use of
the product or from failure to observe the operating instructions and/
or safety notes.
9. Service and Support
Please contact Hama Product Consulting if you have any questions about
this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
To Next Page
Loading...
