4
Warning – Batteries
• Immediately remove and dispose of dead batteries from the
product.
• Only use batteries (or rechargeable batteries) that match the
specied type.
• Do not mix old and new batteries or batteries of a different type
or make.
• When inserting batteries, note the correct polarity (+ and -
markings) and insert the batteries accordingly. Failure to do so
could result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep
them away from uncoated metal objects.
4. Getting started
• Open the battery compartment (2).
• Move the CH slide switch (4) to the left or right to select the channel
on which the measuring station transmits.
• Insert two AA batteries with the correct polarity.
• Once the channel has been assigned to a transmitter, it can only be
changed by removing the batteries or by resetting the measuring
station (see section 6.5 Reset).
• Then close the battery compartment cover.
To Next Page
Loading...
Need help?
General
