Hama Universal 8-in-1 User Manual

The Punch Through Volume allows the VOL+ or VOL- commands to bypass the currently controlled
device and adjust the volume on a second device. All other commands remain uninfluenced. To
activate the punch through volume setting:
• Press desired device mode key (e.g. TV).
• Press and hold “VOL+” key.
• Press desired device mode key (e.g. SAT).
• Release “VOL+” (the indicator flashes once if the setting is activated).
To deactivate the punch through volume setting:
• Press desired device mode key (e.g. TV).
• Press and hold “VOL-” key.
• Press desired device mode key (e.g. SAT).
• Release “VOL-” (the indicator is flashing twice if the setting is deactivated).
6.3 Macro Power
Macro Power enables you to turn two A/V devices on/off simultaneously.
To activate the macro power setting:
• Press desired device mode key (e.g. TV).
• Press and hold “POWER” key.
• Press desired device mode key (e.g. SAT).
• Release “POWER” (the indicator flashes once if the setting is activated).
To deactivate the macro power setting:
• Press desired device mode key (e.g. TV).
• Press and hold “POWER” key.
• Press desired device mode key (e.g. SAT).
• Release “POWER” (the indicator is flashing twice if the setting is deactivated).
7. Maintenance
• Do not mix new and used batteries for powering the Universal Remote Control, as old batteries tend
to leak and may cause power drain.
• Do not use corrosive or abrasive cleaners on your Universal Remote Control.
• Keep the Universal Remote Control dust free by wiping it with a soft, dry cloth.
8. Troubleshooting
Q. My Universal Remote Control does not work at all!
A. Check your A/V device. If the device’s main switch is turned off, your URC cannot operate your
device.
A. Check whether your batteries are inserted properly and are in the correct +/- position.
A. Check whether you have pressed the corresponding device mode key for your device.
A. If the batteries are low, replace the batteries.
Q. If several Device Codes are listed under the brand of my A/V device, how can I select the correct
Device Code?
A. To determine the correct Device Code for your A/V device, test the codes one by one until most
keys work properly.
Q. My A/V equipment responds only to some of the commands.
A. Try other codes until most keys work properly.
9. Service and Support
If you have questions on the product, you are welcome to contact Hama Product Consulting.
Hotline: +49 9091 502-0
For further support information please visit:
www.hama.com
10. Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic devices as well as batteries must not be disposed
of with household waste. Consumers are obliged by law to return electrical and electronic devices as
well as batteries at the end of their service lives to the public collecting points set up for this purpose
or point of sale. Details to this are defined by the national law of the respective country. This symbol
on the product, the instruction manual or the package indicates that a product is subject to these

Hama Universal 8-in-1 Specifications

General

Brand	Hama
Model	Universal 8-in-1
Category	Remote Control
Language	English