Hamamatsu Photonics C9525 SERIES

To Next Page

@X4-0047-5

－ 1 －

INSTRUCTION MANUAL

REGULATED HIGH-VOLTAGE DC POWER SUPPLY

C9525 SERIES

HAMAMATSU PHOTONICS K.K.

To use this product safely:

This product generates high voltage which may cause electrical shock or damage to the

connected equipment if not handled correctly. To use this product correctly and safely, be

sure to read this manual carefully to fully understand its contents. During installation

and operation of this product always follow the instructions explained in the "Essential

safety precautions" sections as well as "WARNING" and "CAUTION" instructions listed

in the text of this manual.

Please acknowledge that we can accept no liability for damage, loss or trouble arising

from failure to comply with precautions and instructions in this manual.

Main Page

Need help?

Do you have a question about the Hamamatsu Photonics C9525 SERIES and is the answer not in the manual?

Summary

Safety Alert Symbols and Signal Words

Essential Safety Precautions

Product Tampering and Electrical Hazard

Warns against removing covers or touching internal parts to prevent electrical shock or fire.

Safe Power Supply Handling

Details precautions for AC power cable use, grounding, and cable management to prevent shock or fire.

Environmental and Operational Safety

Installation Environment Warnings

Ratings and Specifications

Front Panel Description

Rear Panel Description

Operating the C9525 Series

Preparation and Power-On Procedure

Local Mode Panel Operation

Explains how to set voltage, contrast, and other parameters using the front panel keys.

Remote Operation via Sample Program

Guides users on installing and using the C9525 control software for PC-based operation.

Remote Operation Command Set

Command Overview and Communication Settings

Voltage Setting Commands

Control and Status Commands

Data Reading and Reset Commands

Maintenance and Inspection