Hame MPR-A1 - Connect via Cable;DHCP Modem

step 1. Connect the LAN port of ADSL Modem and WAN/LAN port of MPR‐A1 Router by RJ45 
cable.
step2.TurnonthepowerofbothADSLModemandMPR‐A1Router.
step3.MakethecomputerconnecttheWIFISSIDofMPR‐A1(see4.ComputerSetting).
Step4.Openabr
owser,loginwithpass
word"hame",theninputrelevantADSLlogin
credential#5(IDandPassword)inthepopupmenu.PressOK.
step5.Thenyoucouldsurf.

Ifyoucouldnotsurf,Plsdofollowingoperations:
step1.Openabrowserandenterhttp://192.168.169.1ataddressbar.
step2.Enterlogincr
eden
tialwithpasswordas"hame".
step3.ClickInternet>WANNetwork.MakesurethatthePPPOE(ADSL)isbeingselectedin
WANConnectionType.
step4.PleasemakesureUserNameandPasswordarecorrect.

#5:ForunsuccessfulloginwiththeADSLcredential,kindlycontacttheADSLISP
(InternetServiceProvider)Immedia
tely.

4.ConnectviaCable/DHCP
Modem
Beforeyoubegin,pleasemakesureyouhavebelowitemsprepared:
1.MPR‐A1Router.
2.SwitchorRouterwithInternetaccessready(eg:existingofficeLAN,hotelLAN,etcwhichhas
Internetfacilityready).
3.RJ45Cable(useexistingRJ45cablefrommodem).



HardwareIns
tallationSt
eps:
step1.ConnecttheLANportofSwitchorRouterandWAN/LANportofMPR‐A1RouterbyRJ45
cable.