How to fix a Hamilton Beach 14963 that won’t heat up?
If your Hamilton Beach Iron isn't heating, try these solutions: * First, check the outlet by plugging in a lamp to ensure the outlet is working. * Make sure the Temperature Control Dial is turned to a fabric setting. * If you have an automatic shutoff model, check if the Reset Light is flashing. If so, move the iron to reset it.
Why won't my Hamilton Beach 14963 Iron steam?
If your Hamilton Beach Iron isn't steaming, consider the following: * Check the water level to ensure there is enough water in the tank. * Verify that the Steam ON/OFF Control is in the Steam position. * Allow the iron enough time to preheat. * Note that the anti-drip feature prevents steam when the temperature setting is in the dry range.
What to do if water remains inside the soleplate of my Hamilton Beach 14963?
If water remains inside the soleplate of your Hamilton Beach Iron, reheat the iron as indicated in Step 2. Be aware that boiling water and steam could still flow out of the steam vents during this process.
How to adjust the temperature on my Hamilton Beach 14963 Iron?
If your Hamilton Beach Iron is too hot or not hot enough, check the Temperature Control Dial and adjust it to your desired setting level. Allow the iron to cool down for 5 minutes before continuing.
Why is my Hamilton Beach Iron leaking water?
Several factors could be causing your Hamilton Beach Iron to leak water. To resolve this issue: * Avoid overfilling the water tank. * When steam ironing, ensure the Steam ON/OFF Control is in a steam position and the Temperature Control Dial is in the steam range, also ensure the iron has had enough time to preheat. * When dry ironing, make sure the Steam ON/OFF Control is in the DRY IRON position (O). * If using the Blast Button, push it less frequently. * Condition the iron by following the self-cleaning instructions one or two times with tap water (not distilled).
What to do if my Hamilton Beach 14963 Iron is not removing wrinkles?
If your Hamilton Beach Iron isn't effectively removing wrinkles, ensure that the Temperature Control Dial is set to the appropriate fabric setting.
Why does my Hamilton Beach 14963 leave spots on clothes?
Your Hamilton Beach Iron may leave spots on clothes if water is left in the tank after use. Always empty the water tank after using the iron. Water left in the tank may discolor clothing and the soleplate.
How to untwist the cord on my Hamilton Beach 14963 Iron?
If the cord on your Hamilton Beach Iron becomes twisted, unplug the iron and let it cool. Hold the cord in the middle of its entire length. Let the plug and iron dangle freely until the cord uncoils. This will help extend the life of your iron cord.
General| Model | 14963 |
|---|---|
| Type | Steam Iron |
| Power | 1200 Watts |
| Cord Length | 8 ft |
| Soleplate Material | Stainless Steel |
| Voltage | 120 V |
| Auto Shut-off | Yes |
| Self-Cleaning | Yes |
| Vertical Steam | Yes |
| Steam Settings | Variable |
| Steam Output | 30 grams per minute |
| Cord Type | Swivel |
| Weight | 3.5 pounds |
To Next Page