EasyManua.ls Logo

Hamilton Beach 2-Way FlexBrew - Care and Cleaning

Hamilton Beach 2-Way FlexBrew
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Care and Cleaning
All coffee makers should be cleaned at least once a
month (once a week for areas with hard water).
DO NOT use the “SANI” setting
when washing in the dishwasher.
“SANI” cycle temperatures could
damage your product.
2 3
DISHWASHER-SAFE
1
w WARNING
Shock Hazard.
Do not immerse cord, plug, or coffee maker in any liquid.
w WARNING
Burn Hazard.
Failure to allow coffee maker to cool down may cause
hot water or coffee to spray from the piercing nozzle. Use
caution when cleaning.
w CAUTION
Cut Hazard.
Piercing nozzle is sharp. Use caution when cleaning.
OR
5
Routine cleaning of the piercing
nozzle: The nozzle is located in
the lid of the coffee maker. Bend a
small paper clip as shown; insert
the tip of the paper clip through
the holes of the piercing nozzle
and up into the piercing nozzle
to ensure grounds have been
removed. Brew 2 or 3 times with
cold water to make sure grounds
have been removed from the
piercing nozzle.
4

Related product manuals