8
How to Use (cont.)
7. Place one or two cups under Brew
Head spouts. If using one cup, use
one wide enough to catch espresso
from both spouts.
8. Press Start Button. Start Button
Light will illuminate and espresso
will begin to flow. Press Start Button
again at any time to stop flow. As
espresso dispenses, it will gradually
look lighter in color. Allow espresso
to drip from
Filter Holder
for 15-20
seconds before removing cup(s).
9. Wait about 1 minute before removing
Filter Holder
from machine to allow
espresso grounds and excess water
still flowing through pump to finish.
NOTE: Some water may continue to
drip intermittently from Brew Head.
This is normal and a result of product
operation.
10. To empty espresso grounds and/or
an espresso pod from
Filter Holder
,
flip plastic lever located on handle
of
Filter Holder
and hold lever open.
To Next Page
Loading...
