8
How to Use
21 3
Add 1 tablespoon (15 ml) of
ground espresso for each cup
being made. Use shallow filter
for 1 cup and deep filter for 2
cups. Press grounds firmly with
tamping tool and ensure no
grounds remain on the rim.
Align raised dimple on the
exterior of ground espresso/pod
filter with cutout notch on inside
of filter holder. Rotate filter holder
180º to secure.
Fill the removable water reservoir
to the MAX fill line with cold
water and replace securely on the
back of unit.
Place pod into filter. When using
an ESE (Easy Serving Espresso)
pod, always use the shallower
espresso/pod filter. Never put two
pods in either filter at one time.
3
NOTE: Ensure there are no grounds on the rim of the filter holder. This
prevents a proper seal from forming and may damage the machine.
OR
To Next Page
Loading...
