The Hamilton Beach Quiet Blender (model 53604W-CN) is a kitchen appliance designed for blending various ingredients with reduced noise. It features a two-piece removable Quiet Shield that muffles the sound produced during operation, ensuring a quieter blending experience. The blender is equipped with a powerful motor and multiple speed settings, making it suitable for a wide range of blending tasks, from smoothies to more robust mixtures.
Function Description:
The Quiet Blender is primarily used for processing food and liquids. It can blend, chop, and mix ingredients to achieve desired consistencies. The appliance offers three speed settings (LO, MED, HI) for versatile control over blending intensity. Additionally, it includes a dedicated "SMOOTHIE" button, which activates a pre-programmed cycle optimized for blending frozen or fresh smoothies at select speeds and for a preset time, automatically stopping at the end of the program. A "PULSE/CANCEL" button allows for momentary high-speed blending when held down, or to stop the blender at any time.
The blender comes with a glass blender jar for general use and an optional personal blender jar (20-oz./600-ml) for making single-serve beverages to take on the go. The personal jar is particularly useful for preparing smoothies or shakes for individual consumption.
Important Technical Specifications:
- Model Number: 53604W-CN
- Type/Category: B91
- Rating/Specifications: 220-240V~50Hz, 400W
- Blender Jar Capacity: Clearly marked in ounces, cups, and milliliters. For hot liquids, do not exceed the 3-cup (710-ml) level. For general blending, do not fill past the highest graduation marking (6.5 cups/1.5 L).
- Personal Blender Jar Capacity: 20-oz. (591-ml). Do not fill above the MAX fill line.
- Motor Power: 400W
- Materials in Contact with Food:
- Glass Blender Jar Lid, Vent Lid: Polyethylene (LDPE)
- Glass Blender Jar Pour Spout Lid: Acrylonitrile-Styrene (AS)
- Cutting Blade Assembly Base: Polyoxymethylene (POM)
- Glass Blender Jar Sealing Ring: Thermoplastic Elastomer (TPE)
- Personal Blender Jar Lid: Acrylonitrile Butadiene Styrene (ABS)
- Personal Blender Jar Drinking Spout Lid: Polypropylene (PP)
- Personal Blender Jar: Modified Polycyclohexylenedimethylene Terephthalate (PCT)
- Shaft Seal Ring, Personal Blender Jar Lid Seal Ring: Silicone Rubber
- Bearing Support: Stainless Steel (SUS304)
- Spacer, Blade: Stainless Steel (SUS301)
- Blade Shaft: Stainless Steel (SUS430)
- Glass Blender Jar: Borosilicate Glass
- Environmental Protection Use Recommended Period: 10 years (indicated by the logo on the product).
- Hazardous Substances: The product complies with SJ/T 11364. Certain components may contain lead (Pb) above the limit requirement due to current technological or economic reasons, but efforts are made to replace these substances.
Usage Features:
- Assembly: Ensure the blender is unplugged before assembly. Place the cutting blade assembly, blade side up, through the opening in the blending jar, then twist the collar onto the bottom of the jar. Add ingredients. Place the lid on the jar and then the blender jar onto the base, ensuring the jar handle is within the marked range. For the Quiet Shield, press both shield locking buttons while sliding the back shield around the base, then secure it by pressing the back shield and blender base together. Finally, close the front Quiet Shield door. The blender will not operate unless the Quiet Shield is properly locked and closed.
- Operation: Plug the blender into an outlet. Press the ON(I)/OFF(O) switch to turn on power. The control panel will flash, and the PULSE/CANCEL button will flash, indicating readiness. Select a desired speed (1, 2, or 3) or press the SMOOTHIE button for the pre-programmed cycle. For pulse blending, press and hold the PULSE/CANCEL button. To stop blending, press the PULSE/CANCEL button or turn off the blender using the ON(I)/OFF(O) switch.
- Hot Liquids: When blending hot liquids, open the center vent lid and close any edge cover opening. Do not exceed the 3-cup (710-ml) level. Use an oven mitt or thick towel to hold the lid down and start blending at the lowest speed to prevent burns from sudden steaming. Do not blend hot liquids in the personal jar.
- Blender Jar Tips: Always place liquid in the blender jar first. The minimum liquid needed per recipe is 1 cup (237 ml). If blending stops or ingredients stick, stop, pulse, or add more liquid. Avoid bumping or dropping the blender. Cut large fruits and vegetables to speed up blending. Do not fill past the highest graduation mark. Crush ice immediately after placing it in the jar.
- Personal Jar Tips: If blending stops or ingredients stick, press PULSE/CANCEL, remove the jar, shake, and return to blend. Minimum liquid needed is 3/4 cup (177 ml). Place frozen ingredients or ice into the jar first when filling. Do not chop hard foods like ice cubes, cheese, crackers, or meat. Do not blend hot liquids. Do not fill above the MAX fill line.
- Troubleshooting:
- Flashing SMOOTHIE and PULSE/CANCEL buttons: Indicates a locked rotor condition. Turn power OFF, remove the jar, turn power ON, run the blender without the jar on speed 3 for 30-60 seconds, then resume normal operation.
- Blender fails to start: Check if the main power switch is ON, if the unit is plugged in securely, and if the circuit breaker or fuse is intact. Ensure the jar handle is within the pointed range on the jar pad, and that the jar/jar collar/jar pad are in place. Also, confirm the quiet shield is in position and completely closed.
- Ingredients not mixing properly: Add more liquid, ensure solid pieces are not too large, do not overfill the container, check for sharp blades, and select an appropriate speed.
- Burning smell: Turn off and cool the unit. This may be due to motor windings curing during initial heavy use and should dissipate. If it persists, contact customer service.
- Grease around the bottom of the blender jar/on countertop: Monitor the problem; it may indicate an issue with jar bearings. Contact customer service if it persists.
Maintenance Features:
- Cleaning: Always unplug the blender before cleaning. Remove the quiet shield, blender jar, and lid. Rotate the collar counterclockwise to separate the collar and cutting blade assembly from the jar.
- Base Cleaning: Wipe the blender base, control panel, and cord with a damp cloth or sponge. Do NOT immerse the base in water. Use a mild, non-abrasive cleanser for stubborn spots.
- Quiet Shield Cleaning: Clean with hot, soapy water and dry thoroughly.
- Dishwasher Safe Parts: The blender jar, personal blender jar, lid, jar collar, and cutting blade assembly are dishwasher-safe. Do NOT use the "SANI" setting, as high temperatures can damage the product. Parts can also be washed with hot, soapy water, rinsed, and dried thoroughly. Do not soak.
- Blender Jar Self-Cleaning: Add 5 cups (1.2 L) warm water and two drops of dish soap. Press speed 1 and blend for 30 seconds. Rinse and dry.
- Cleaning Oily Residue: For oily foods, sprinkle baking soda in the blender, add 1 cup (237 ml) white vinegar. Once bubbling subsides, add 1 1/2 cups (355 ml) water and blend on speed 1 for 30 seconds. Wash any remaining residue with dish soap and water, then rinse and dry.
- Blade Care: Blades are sharp; handle carefully during assembly, disassembly, and cleaning. Always inspect the jar and cutting blade assembly for nicks, chips, cracks, or loose blades. Do not use damaged parts and contact customer service for replacements.
- Thermal Cut-out: To avoid hazards from inadvertent resetting of the thermal cut-out, the appliance should not be supplied through an external switching device (like a timer) or connected to a circuit that is regularly switched on and off by the utility.
- Operation Time: Do not operate the blender for more than 2 minutes ON at a time.
To Next Page
Need help?
General
