Hamilton Beach 53602-CN

Need help?

Do you have a question about the Hamilton Beach 53602-CN and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

The Hamilton Beach Quiet Blender (model 53602-CN, Type B91) is a versatile kitchen appliance designed for blending various ingredients, including frozen and fresh smoothies, crushing ice, and preparing cocktails. It operates on a 220-240V ~ 50-60Hz 400W power supply. A key feature of this blender is its "Quiet Shield," a two-piece removable enclosure that significantly reduces operational noise, enhancing the user experience.

Function Description:

The blender is equipped with a robust motor and sharp cutting blades designed for efficient processing of both soft and hard ingredients. It offers multiple blending modes to cater to different culinary needs:

PULSE: Provides short bursts of high-speed blending, ideal for chopping, mincing, or controlling the texture of ingredients. The blender runs at high speed only when the PULSE button is held down.
CANCEL: Stops any ongoing blending program or operation.
SMOOTHIE: Optimized for blending frozen or fresh smoothies, ensuring a smooth and consistent texture.
ICE CRUSH: Specifically designed to break ice into small pieces suitable for slushies or fine cocktails. It can handle 1 to 1 1/2 cups (237 to 355 ml) of ice cubes.
CLEAN: A self-cleaning program that simplifies maintenance. Users add 5 cups (1.2 L) of warm water and two drops of dish detergent to the blender jar, run the program, then rinse and dry.

The blender also features a manual mode with five-speed buttons, allowing users to increase or decrease blending speed for precise control over the blending process.

Important Technical Specifications:

Model: 53602-CN
Type: B91
Ratings: 220-240V ~ 50-60Hz 400W
Main Blender Jar Capacity: Not explicitly stated in cups, but hot liquids should not exceed the 3-cup (710-ml) level.
Personal Blender Jar Capacity: 20-oz (591-ml) for best performance, with a minimum liquid needed per recipe of 3/4 cup (6 ounces/177 ml).
Materials:
- Blender Jar Lid and Vent Cap: LDPE (Low-Density Polyethylene)
- Blender Jar Handle and Collar: AS (Acrylonitrile Styrene)
- Cutting Blade Assembly: POM (Polyoxymethylene) and Stainless Steel (12Cr-17Ni7(SUS301), 10Cr-17(SUS430))
- Blender Jar Seal Ring and Personal Jar Seal Ring: TPE (Thermoplastic Elastomer)
- Personal Blender Jar and Drinking Lid: PP (Polypropylene)
- Personal Jar: PCT (Polycyclohexylenedimethylene Terephthalate)
- Bearing: Stainless Steel (06Cr-19Ni10(SUS304))
- Glass Blender Jar: High Borosilicate Glass

Usage Features:

The Hamilton Beach Quiet Blender is designed for ease of use and safety:

Assembly:
1. Ensure the blender is unplugged and placed on a clean, dry surface.
2. Place the cutting blade assembly, blade side up, through the opening in the blending jar before twisting the collar onto the bottom of the jar.
3. Add ingredients.
4. Place the lid on the jar.
5. Place the blender jar onto the base, aligning the jar handle with the mark range.
6. Assemble the back shield by pressing both shield locking buttons while sliding it around the base.
7. Secure the back shield and blender base together.
8. Close the Quiet Shield. The blender will only operate when the back Quiet Shield is locked in the correct position and the front Quiet Shield door is fully down.
9. Plug into an outlet. Press the ON (I)/OFF (O) switch to power on. The control panel will flash, and the CANCEL button will continue to flash, indicating readiness.
Blending Hot Liquids: When blending hot liquids, open the center vent lid and close any edge cover opening. Do not exceed the 3-cup (710-ml) level to prevent burns. Start blending at the lowest speed.
Personal Jar Usage (Optional):
1. Add ingredients to the personal jar. Carefully place the cutting blade assembly and collar onto the personal jar.
2. Turn the personal jar upside down and shake, then place it onto the base.
3. Close the Quiet Shield and plug in the blender. Press ON (I)/OFF (O) to power on, then select the desired speed button. For PULSE, hold the button down. Press CANCEL to stop.
4. To remove, unplug the blender, turn off the ON (I)/OFF (O) switch, lift the Quiet Shield, remove the personal jar from the base, turn it bottom up, and remove the collar and cutting blade assembly.
5. Hand-tighten the drinking lid onto the personal jar for on-the-go use.
Safety Interlocks: The Quiet Shield features an interlock system, preventing operation unless it is correctly closed and locked, ensuring user safety.
Program Settings: Programs are optimized for specific recipe categories, varying in speed and duration, and automatically stop at the end of the cycle.
Blender Jar Tips:
- Always place liquid in the blender jar first.
- For best performance, a minimum amount of liquid is needed per recipe (1 cup/237 ml).
- Do not allow ice to stand or freeze in the jar.
- Keep the lid on for easy pouring.
Personal Jar Tips:
- Do not blend hot liquids in the personal jar.
- Do not chop or process hard foods such as cheese, crackers, or meat.
- When filling, place frozen ingredients or ice on top.

Maintenance Features:

Regular cleaning and inspection are crucial for maintaining the blender's performance and longevity.

Cleaning the Blender Jar:
1. Unplug the blender.
2. Remove the Quiet Shield.
3. Rotate the collar counterclockwise until the collar and cutting blade assembly separate from the blender jar.
4. Alternatively, remove the personal jar from the base, rotate the collar counterclockwise until the collar and cutting blade assembly separate from the personal jar.
5. Wipe the blender base, control panel, and cord with a damp cloth or sponge. For stubborn spots, use a mild, nonabrasive cleanser.
6. The blender jar, personal blender jar, lid, jar collar, and cutting blade assembly are dishwasher-safe.
7. DO NOT use "SAN" setting when washing in the dishwasher, as cycle temperatures could damage the product. Parts may also be washed with hot, soapy water. Rinse and dry thoroughly. Do not soak.
Cleaning Blender Jar (Self-Clean Program):
1. Add 5 cups (1.2 L) warm water and two drops of dish soap.
2. Press the CLEAN button.
3. Rinse and dry thoroughly.
4. To clean after blending oily foods, sprinkle baking soda in the blender. Add 1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling subsides, add 1 1/2 cups (355 ml) water and blend on the CLEAN cycle. Wash any remaining residue with dish soap and water. Rinse and dry thoroughly.
Removing and Replacing the Quiet Shield:
- To Remove: Start with the front shield, separating it from the back at the rubber hinges. Press tabs on both sides of the blender while moving the back shield back with your thumbs. Slide the back shield away from the blender base.
- To Replace: Press both shield locking buttons in while sliding the back shield around the base. Secure the back shield and blender base together. Pull the front shield around the rear shield. Secure the round hinges of the front shield around the rubber hinges.
Inspection: Always inspect the blender jar for nicks, chips, or cracks, and the cutting blade assembly for broken, cracked, or loose blades. Do not use if damaged; contact customer service for replacement parts.
Food Contact Materials: The device uses food-grade materials such as LDPE, AS, POM, TPE, PP, PCT, and high borosilicate glass, ensuring safety for food preparation.
Environmental Protection: The product includes an environmental protection use recommended period (Year) of product in normal use, indicated by the "10" symbol.