3
Know Your Juice Extractor
Before First Use:
After unpacking the juice extractor,
wash everything except the base in
warm, soapy water. Rinse and dry
immediately. Never immerse the
base in water; wipe it with a damp
sponge.
To Disassemble: Unplug cord
from outlet. Unlock safety latch
by pulling out bottom of latch.
Remove cover, then lift up
separator with cutter/strainer.
1. Food Pusher
2. Food Chute
3. Cover
4. Cutter/Strainer
5. Separator
6. Safety Latch
7. Juice Cup*
8. Power Switch
9. Pulp Bin
10. Motor Base
11. Cleaning Brush*
* Featured on selected
models
wWARNING
To reduce risk of personal injury and/or damage to your juice extractor:
• Never wash cutter/strainer or other removable parts in a dishwasher.
• Always inspect cutter/strainer before each use.
• Never use a cracked, bent or damaged cutter/strainer.
IMPORTANT INFORMATION: The cutter/strainer is a very delicate screen
subject to wear, and therefore is not covered under warranty. Call our toll-free
customer service number to order a new cutter/strainer.
To Next Page
Loading...
