6
Making Bags From Bag Rolls
3 421
Determine size of bag needed
based on size of what is being
vacuum-sealed. Allow enough
space for sealing top and bottom
of bag. Cut to size.
Center open end of bag within
vacuum chamber.
Close and hold lid; then press
Seal Only button. Continue
holding lid closed during
entire sealing process.
Wait until light turns green before
letting go of lid and removing bag.
w CAUTION
Burn Hazard. Seal
bar is hot. Avoid touching it.
Allow unit to cool 20 seconds
before making or vacuum-sealing
another bag.
NOTES:
• Allow 20 seconds between each use.
• Never open the lid during use.
• Do not let moisture into the vacuum chamber.
This may damage the motor.
To Next Page
Loading...
