EasyManua.ls Logo

Hamilton Beach FlexBrew - How to Program for Wake Up Coffee

Hamilton Beach FlexBrew
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Care and Cleaning
4 5
Routine Cleaning of the Needle: The needle is located in the lid of the coffee maker. Bend a small paper clip
as shown; insert the tip of the paper clip through the hole/eye of the needle and up into the needle to ensure
grounds have been removed. Brew 2 or 3 times with cold water to make sure grounds have been removed
from the piercing needle.
6
1
DISHWASHER-SAFE
All coffee makers should be cleaned at least once a month
(once a week for areas with hard water).
2 3
DO NOT use the “SANI” setting
when washing in the dishwasher.
“SANI” cycle temperatures could
damage your product.
Pour 3/4 cup (177 ml) of plain white vinegar and 3/4 cup (177 ml) of cold water into reservoir. Place a 14-oz. (414 ml) cup
or travel mug underneath to catch the water/vinegar solution. Press the I/
O
(ON/OFF) button once. After 30 seconds,
unplug unit and allow vinegar to clean. After 30 minutes, plug in unit. Press I/
O
(ON/OFF) button and allow it to finish the
brew cycle. When brew cycle is finished, wait for unit to cool. Empty cup and rinse. Run 2 to 3 cycles of cold tap water.
The unit is cleaned and ready to make coffee.
w WARNING
Shock Hazard.
Do not immerse cord, plug, or
coffee maker in any liquid.
w CAUTION
Cut Hazard.
Use caution when handling:
• Removable single-serve pack
holder has a sharp blade.
• Piercing needle on the
underside of the lid is sharp.

Other manuals for Hamilton Beach FlexBrew

Related product manuals