Hamilton C2000 User Manual

Document #101-0009 7 3/09/05
III. ERROR CODES
As described earlier in the OPERATION section, when a fault has been detected, the LED will flash an error
code. An LED that remains off indicates no power or a major failure of the Controller. In the event that a
malfunction occurs, the following pages provide assistance for diagnosis.
*The following pages provide detailed definitions of error codes.
Always note the error code before attempting any service or before
contacting HAMILTON.
1 FLASH, PAUSE, 1 FLASH HOPPER 1 EMPTY
1 FLASH, PAUSE, 2 FLASHES HOPPER 2 EMPTY
1 FLASH, PAUSE, 3 FLASHES HOPPER 3 EMPTY
1 FLASH, PAUSE, 4 FLASHES ALL ALTERNATING–DEFAULTING HOPPERS ARE EMPTY
2 FLASHES, PAUSE, 1 FLASH HOPPER 1 JAMMED
2 FLASHES, PAUSE, 2 FLASHES HOPPER 2 JAMMED
2 FLASHES, PAUSE, 3 FLASHES HOPPER 3 JAMMED
3 FLASHES, PAUSE, 1 FLASH NICKEL INPUT STUCK
3 FLASHES, PAUSE, 2 FLASHES DIME INPUT STUCK
3 FLASHES, PAUSE, 3 FLASHES QUARTER INPUT STUCK
3 FLASHES, PAUSE, 4 FLASHES $1 DOLLAR INPUT STUCK
3 FLASHES, PAUSE, 5 FLASHES $5 DOLLAR INPUT STUCK
4 FLASHES, PAUSE, 1 FLASH HOPPER 1 COIN DROP STUCK
4 FLASHES, PAUSE, 2 FLASHES HOPPER 2 COIN DROP STUCK
4 FLASHES, PAUSE, 3 FLASHES HOPPER 3 COIN DROP STUCK
5 FLASHES, PAUSE, 1 FLASH UNEXPECTED HOPPER 1 PAYOUT
5 FLASHES, PAUSE, 2 FLASHES UNEXPECTED HOPPER 2 PAYOUT
5 FLASHES, PAUSE, 3 FLASHES UNEXPECTED HOPPER 3 PAYOUT
6 FLASHES, PAUSE, 1 FLASH STACKER BUSY TIMEOUT
6 FLASHES, PAUSE, 2 FLASHES INVALID PAYOUT SWITCH SETTING
6 FLASHES, PAUSE, 4 FLASHES TIMEOUT FOR VALIDATOR TO ADVANCE BILL (DUAL STACKER)
6 FLASHES, PAUSE, 5 FLASHES VALIDATOR SHUT DOWN ERROR
7 FLASHES, PAUSE, 2 FLASHES POWER LOSS DURING VEND
7 FLASHES, PAUSE, 3 FLASHES INVALID TOKENOTE CODE
ERROR CODES

Hamilton C2000 Specifications

General

Brand	Hamilton
Model	C2000
Category	Controller
Language	English