EasyManuals Logo

Hamlet HN05S User Manual

Hamlet HN05S
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Introduction
Hamlet HN05S/HN08S is a high-performance Fast
Ethernet switch with all ports capable of 10 or 100 Mbps
auto-negotiation (NWay) operation, which means the
switch could automatically negotiate with the connected
partners on the network speed and duplex mode.
It is ideal for micro-segmenting large networks into smaller,
connected subnets for improved performance, enabling the
bandwidth demanding multimedia and imaging
applications. Compared to the shared 10Mbps or 100Mbps
networks, the switch delivers a dedicated 10/100Mbps
connection to every attached client without bandwidth
congestion issue.
This switch also supports auto MDI/ MDI-X function. Each
port could be used to connect to another switch or hub
without crossover RJ-45 cable.
Store-and-forward switching mode promises the low
latency plus eliminates all the network errors, including runt
and CRC error packets. To work under full-duplex mode,
transmission and reception of the frames can occur
simultaneously without causing collisions as well as double
the network bandwidth. Moreover, Green Ethernet and
Pre-IEEE 802.3az Energy Efficient Ethernet (HN05S only)
is supported to save power consumption.
The switch is plug and play without any software to
configure and also fully compliant with all kinds of network
protocols. The diagnostic LEDs on the front-panel can
provide the operating status of individual port and whole
system.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hamlet HN05S and is the answer not in the manual?

Hamlet HN05S Specifications

General IconGeneral
BrandHamlet
ModelHN05S
CategoryNetwork Router
LanguageEnglish