Hamlet HXDDWIFI User Manual

4.4 Wireless Repeater mode (Wi-Fi network extension)
The Wireless Repeater mode allows you to connect the Wi-Fi Docking
Station to an existing Wi-Fi network to extend the coverage area of the
wireless signal.
To use the docking station as a Wireless Repeater, proceed as indicated in
the following steps.
1. Insert the hard drive into the docking station, making sure to place it in
the correct direction.
2. Make sure the HDD is firmly connected to the SATA connector.
3. Connect the power cable to DC power input of the docking station and to
an electrical power outlet.
4. Turn on the docking station pressing the power button and wait at least
40 seconds for the Wi-Fi signal to be ready.
5. Connect to “Hamlet-WiFiDisk-XXXX” wireless network and input the Wi-
Fi key when requested (default password is “az48486y”).
6. Open the web browser, type in http://192.168.169.1 in the address bar
and press Enter. In the login screen type in user name (admin) and
password (admin) and click OK to access the web interface of the
docking station
7. Click on WiFi Repeater icon to access the configuration page.

Hamlet HXDDWIFI Specifications

General

Brand	Hamlet
Model	HXDDWIFI
Category	Docking Station
Language	English