8. Press the Search all APs button to view the available Wi-Fi networks.
9. Select the network you want to connect the docking station, if the
network is secured enter the Wi-Fi password, and press the Apply
button to save the configuration.
10. Wait for the device to reboot and then reconnect to the Wi-Fi network of
the docking station.
The docking station is so configured as Wireless Repeater.
Note: In this mode, the LAN port on the docking station should be
disconnected. Once you set up the docking station as a Repeater, the web
interface is no longer accessible. To change the configuration of the docking
station will be necessary to reset the device.
To Next Page
Loading...
