RESTORE PROCEDURE
The following procedure allows you to restore the tablet to factory settings.
WARNING!
This recovery process deletes all the data on your tablet.
Restoring the tablet
It is now possible to restore the tablet according to the following points.
1. With the tablet turned off press and hold the “Power” and “Volume +” buttons for at least 10
seconds to open the recovery menu.
2. Use the “Volume +“ button to move between menu items and the “Volume –” button to select.
3. Select the “RECOVERY MODE” menu item then press “Volume –” button.
4. In the following screen, use the “Volume +” and “Volume –” buttons to move between menu
items and the “Power” button to select.
5. Select the “WIPE DATA/FACTORY RESET” menu item then press “Power” button.
6. At the following screen, select “YES” and press the “Power” button.
7. Wait a few seconds until reset procedure is completed.
8. Once the reset procedure is completed, select the “REBOOT SYSTEM NOW” menu item and
press the “Power” button to confirm.
9. The tablet will reboot with factory default settings.
Important Note
Hamlet disclaims any liability for any loss of data. To prevent possible data loss, it is highly
recommended that you make a copy of the data and store it on an external hard drive or on a
removable storage media.
To Previous Page
Loading...