2 3
SPECIFICATONS FOR SOLAS APPROVED UNITS
HOW IT WORKS
1 2
3
MANUAL RELEASE
In order to launch the liferaft manually, release the sliphook and throw the liferaft
overboard. The liferaft is now attached to the vessel by the painter line via the Red Weak
Link™ connector. Pull the painter line and infl ate the liferaft so the survivors can board.
APPROVALS
The Hammar H20 hydrostatic release units are approved all over the world, fulfi l the
requirements of the SOLAS 74 Convention, IMO Res. MSC 97(73)8.1/8.6 (2000 HSC Code)
IMO Res. MSC. 48(66), IMO Res. MSC.81(70), IMO MSC/Circ.811, approved to EU Directive
96/98 EC on Marine Equipment, UK Merchant Shipping regulations 2016 N
o
1025 and has
Nato Stock Number. Release depth 1,5 - 4,0 metres according to IMO/SOLAS regulations.
The required certifi cates can be downloaded from our website: www.cmhammar.com
Serial no. Man. date Security no.
XXXXX YYMM XXX
MarCode
Notifi ed body no./year
4
R for Raft
Dispose after X years/months
after installation onboard
Breaking strength strong rope: minimum 15 kN
Breaking strength weak link: 2,2 ± 0,4 kN for liferafts from 6 up to 150 persons
Release depth: 1,5 – 4,0 metres
Temperature range: -30 to +65
o
C
FLOATFREE FUNCTION
To Next Page
Loading...