12 1.4 AMP DETAIL SANDER
OPERATING INSTRUCTIONS
4. Dust extraction
We recommend the use of the dust
extraction facility at all times.
Simply slide the dust extraction tube or
box onto the dust extraction port and
slide fully in to keep it in position. The
dust extraction tube can be connected
with a dust extraction system or a
suitable vacuum cleaner.
Always keep the dust extraction holes in
the sanding base free of obstructions.
To remove the dust extraction tube or
box, simply pull away from the tool
WARNING: Do not use the dust
extraction box when sanding metal. The
hot metal particles could cause residual
wood dust or the box itself to catch fire.
5. Switch on and off
a) Switch the sander on by pressing
the “I” mark of the on/off switch.
b) To turn off the sander, press the
“O” mark of the on/off switch.
WARNING: Always lift the sander
from the work before switching on or
switch off.
5
4
To Next Page
Loading...