Why my Hammerhead HADS014 Sander does not start?
If your Hammerhead Sander doesn't start, first ensure it's properly connected to a power supply. If it is, a defective power cord or other electrical issue might be the cause. In such cases, it's best to have the sander serviced by an Authorized Service Center.
What to do if my Hammerhead HADS014 Sander does not reach full power?
If your Hammerhead Sander isn't reaching full power, the issue could stem from a few things. First, check if you're using an extension cord that's suitable for operating the sander. If not, switch to a proper one. Another potential cause is a power source with too low voltage; try connecting to a different power source. Lastly, ensure the air vents aren't blocked, and clean them if necessary.
How to improve sanding results with Hammerhead Sander?
If you're getting unsatisfactory results with your Hammerhead Sander, it might be because the sanding paper is worn. Replace it with a new one. Also, the sanding paper might not be suitable for the material you're working with. Use proper sanding paper.
Details on power input, speed, and sanding base size.
Explains symbols used in the manual and their meanings.
Covers work area, electrical, and personal safety precautions.
Guidelines for operating, maintaining, and storing the tool safely.
Instructions for servicing and cleaning the tool safely.
Familiarize yourself with features and safety before use.
Identifies all components included in the product package.
Guidance on choosing grit and securely attaching sandpaper.
Instructions for attaching triangle and diamond tip shapes.
How to use dust extraction and switch the sander on/off.
Best practices for sanding various surfaces and reaching areas.
Procedures for cleaning the tool and its lubrication needs.
Recommended sizes and types of extension cords for the tool.
Identifies issues like non-starting or unsatisfactory results and their fixes.
Details the warranty period, coverage, and exclusions.
General| Voltage | 230 V |
|---|---|
| Power | 300 W |
| No-load speed | 12000 rpm |
| Base dimensions | 125 mm |
| Weight | 1.5 kg |
| Dust extraction | Yes |
| Sander type | Random orbit |
| Power source | Electric |
To Next Page