10 SELF-LEVELING 360-DEGREE CROSS LINE LASER
OPERATION
4. HAND RECEIVER MODE
When working with the tool
outdoors, the strong sunlight will
make the laser lines hard to be
identied. Switch to hand receiver
mode: the laser lines will now
pulsate with high frequency. When
received by the a laser receiver
(available separately), the laser can
be detected up to 100 ft. away.
To switch to hand receiver mode,
keep the mode button pressed; the
LED indicator will illuminate.
This mode can be used when the tool is in self-leveling or lock mode.
4
HAND RECEIVER
LED INDICATOR
To Next Page
Loading...