8 SELF-LEVELING 360-DEGREE CROSS LINE LASER
OPERATION
2. TO TURN THE SELF-LEVELING
360-DEGREE CROSS LINE
LASER ON AND OFF
The power switch is located on the
side of the tool.
a. To turn the self-leveling
360-degree cross line laser on,
push the power switch in the
direction of the “ON” arrow.
WARNING
When turning on the self-leveling 360-degree cross line laser, always be aware
of protecting your eyes and the eyes of those around you. Never point the self-
leveling 360-degree cross line laser at anyone’s face, including your own.
b. To turn the tool off, slide the switch in the direction of the “OFF” arrow.
ON
OFF
2
To Next Page
Loading...