Pedal Switch Busbar Shifters
The pedal switch is equipped with busbar shifters similar to those on the manuals.
The pedal busbar shifter is a slotted stud on the rear surface of the pedal switch,
near the right end as you look in at the back. It should be adjusted as described
under Manual Busbar Shifters on page 3 of this section.
Pedalclavier
Pedal keys are set at the factory for average tension, but a re adjustable to fit
the requirements of the individual organist. Adjustment is accomplished by removal
of the top cover at the back of the pedal keyboard and setting the tension as
desired.
14
To Next Page
Loading...
