HAMPTON BAY 10856 - Connecting the Top and Hose; Adding Water

6
Assembly (continued)
3
Connecting the top on the base
and the hose to the pump
4
Adding water
NOTE: Two people are required in order to complete this
step.
□ Connect the hose from the top (C) to the pump (B) outlet.
□ Carefully lower the top (C) onto the base (A).
□ Position the top (C) on the base (A).
NOTE: Ensure the hose is not pinched or crimped when the
top (C) is placed on the base (A).
□ Add water to the base (A). Fill within 1-2 inches below the
rim of the base (A).
NOTE: As you are filling the base (A), check for leaks and be
careful not to overfill.
A
C
B
A