To Next PageTo Next Page
Need help?Do you have a question about the HAMPTON BAY HEATHER GLEN FRN-312641 and is the answer not in the manual?
This document outlines the assembly, care, and use of the Hampton Bay Heather Glen 3 PC Corner Sectional, identified by Item #XXX XXX XXXX and Model #FRN-312641. It serves as a comprehensive guide for owners, ensuring proper setup and longevity of the furniture.
The Hampton Bay Heather Glen 3 PC Corner Sectional is a modular outdoor furniture set designed to provide comfortable seating for relaxation and social gatherings. The "3 PC" designation indicates that the set comprises three main components: a table, a left corner sofa, and a right corner sofa. These pieces are intended to be arranged together to form a cohesive corner seating unit, offering flexibility in configuration to suit various outdoor spaces such as patios, decks, or gardens. The sectional's design aims to enhance outdoor living areas by providing a stylish and functional seating solution. The inclusion of a table suggests a complete setup for entertaining, allowing users to place drinks, snacks, or decorative items within easy reach while seated. The "corner sectional" aspect implies an L-shaped arrangement, maximizing seating capacity while fitting efficiently into a corner space. The cushions, both seat and back, are integral to the comfort aspect, designed to be placed on the sofa frames once assembled. The self-leveling feet on both the table and the sofa units are a practical feature, ensuring stability on uneven surfaces, which is common in outdoor environments.
The assembly process for the Hampton Bay Heather Glen 3 PC Corner Sectional is broken down into distinct sections for each component: the table, the left corner assembly, and the right corner assembly. This modular approach simplifies the setup, allowing users to focus on one part at a time. The manual emphasizes that assembly requires two people, highlighting the potential size and weight of the components.
For the table assembly, the process involves attaching four table legs (J) to the table top (I) using M6*15mm bolts (AA) and washers (CC), secured with a hex wrench (DD). The table top is initially placed upside down on a soft, clean, and level surface to facilitate this. Once the legs are attached, the table is turned over, and its self-leveling feet are adjusted to ensure stability. This step is crucial for preventing wobbling and ensuring a flat surface for items placed on the table.
The left corner assembly involves several steps to construct the left corner sofa. It begins by connecting the front leg (C) to the right leg (A) using M615mm bolts (AA) and washers (CC). Next, the sofa seat (G) is connected to these assembled legs using M625mm bolts (BB) and washers (CC). The back leg (H) is then inserted into the sofa seat (G) using M615mm bolts (AA) and washers (CC). Finally, the left corner backrest (B) is attached to the sofa seat (G) using a combination of M615mm bolts (AA), M6*25mm bolts (BB), and washers (CC). The manual explicitly advises against over-tightening bolts until all connections are made, suggesting a sequence of loose assembly followed by final tightening with the hex wrench (DD). After the frame is assembled, the self-leveling feet are adjusted for balance. The last step involves placing the seat cushions (K) and back cushions (L) onto the sofa seat (G), making the sofa ready for use.
The right corner assembly mirrors the left corner assembly in its sequence and types of connections, but with corresponding "right" components. It starts by connecting the front leg (F) to the left leg (D) using M615mm bolts (AA) and washers (CC). The sofa seat (G) is then attached to these legs using M625mm bolts (BB) and washers (CC). The back leg (H) is inserted into the sofa seat (G) with M615mm bolts (AA) and washers (CC). The right corner backrest (E) is then connected to the sofa seat (G) using M615mm bolts (AA), M6*25mm bolts (BB), and washers (CC). Similar to the left corner, all bolts are initially left loose and then tightened with the hex wrench (DD) after all parts are aligned. The self-leveling feet are adjusted, and finally, the seat cushions (K) and back cushions (L) are placed on the sofa seat (G).
Throughout the assembly process, safety warnings are provided. Users are cautioned to keep children out of the assembly area. A specific warning advises against using sharp equipment like knives and scissors to remove protective material, as it may damage the product. Crucially, users are warned not to sit or stand on the table or stand on the chair, emphasizing that these items are designed for seating and support, not as platforms. The "SAVE THESE INSTRUCTIONS" directive underscores the importance of retaining the manual for future reference, especially for troubleshooting or replacement parts.
The product comes with a two-year limited warranty, covering manufacturing defects in the frame from the purchase date. This warranty specifically addresses issues like broken frames or welds. Frame finishes are also warranted against blistering, cracking, or peeling for two years. It's important to note that this is a residential use warranty, meaning it is void if the product is used in commercial settings. Proof of purchase is required for any warranty claims.
The manual provides clear instructions for the care and cleaning of the Hampton Bay Heather Glen 3 PC Corner Sectional, aimed at preserving its appearance and extending its lifespan. For cleaning the frames, users are advised to use mild soap and warm water. After cleaning, the frames should be rinsed with clean water and dried thoroughly.
A critical maintenance step involves draining any water that may accumulate inside the frames. To achieve this, users are instructed to remove the footcaps and, if necessary, tilt the frames to ensure all water is expelled. This is particularly important because water left inside the frames, especially when exposed to sub-freezing temperatures, can cause damage to the frame tubing. Such damage resulting from these conditions is explicitly stated as not being covered under warranty, highlighting the importance of this preventative measure.
For any rust spots that may appear, the manual recommends lightly sanding the affected area. This should be followed by treating the spot with a rust inhibitor. Finally, an application of touch-up paint (not included with the product) is suggested to restore the finish and prevent further rust. This indicates that while the frame finishes are warranted against certain issues, ongoing maintenance is expected to address minor wear and tear.
The availability of replacement parts is also a key maintenance feature. The manual lists specific replacement part numbers for components such as the table leg (J), self-leveling feet (SLF), and hardware kits for the table, left corner, and right corner assemblies. This ensures that users can obtain necessary components if parts are lost or damaged over time, rather than needing to replace the entire unit. Contacting Hampton Bay Customer Service is the recommended method for obtaining these parts or for any questions, problems, or missing parts before returning to the store. Customer service hours are provided for convenience.
Overall, the maintenance guidelines are straightforward and focus on regular cleaning, preventing water damage, addressing rust, and facilitating part replacement, all contributing to the long-term enjoyment and functionality of the sectional.
General| Product Name | HAMPTON BAY HEATHER GLEN FRN-312641 |
|---|---|
| Category | Outdoor Furnishing |
| Color | Brown |
| Weight Capacity | 250 lbs |
| Assembly Required | Yes |
| Frame Material | Steel |
| Material | Steel, Wicker |
| Seating Capacity | 1 Person |
