Hanasis HW-9000 User Manual

USER GUIDE
※ Product specifications are subject to change without prior notice and may vary according to region.
● Hanasis shall not be liable for technical or editorial errors in this document.
● This user guide is not intended for everyone. It is written for technically qualified personnel only.
1
Datachment
Handle
Stand
Side Cover
Stand
Side Cover
1
I/O Ports Cover
Please always check
the directions.
① Detach the Stand Side Covers as shown in the illustration.
② Detach the I/O Ports Cover.
③ Connect the Power Adapter.
④ Press the Power Button to turn on the system.
■ Connecting DC Power Supply Cable & Turning System On
3
3
[ Standard ]
□ I/O Ports Layout
■ Parts Description
Power Lamp
(MSR, SCR, iButton)
Error Lamp
Reset Button
Card Reader
External USB (2 ports)
Storage Lamp
Lan Lamp
Power Button &
Power Supply Lamp
Dual (Touch) Monitor
I/O Ports
NFC Reader
Barcode Scanner
(Optional)
(Optional)
Cable Vent
Cable Space
Power Button
Power
Adaptor

Hanasis HW-9000 Specifications

General

Brand	Hanasis
Model	HW-9000
Category	Monitor
Language	English

Summary

Parts Description

Component Identification

Identifies key components like card reader, lamps, buttons, and ports on the device.

I/O Ports Layout

Details the arrangement and types of input/output ports on the device.

Connecting DC Power Supply & System On

Power Cable Connection Steps

Step-by-step guide for connecting the power supply cable and powering on the system.

Proper Way to Use Card Reader

Card Reader Operation

Instructions for correctly inserting and sliding credit cards into the reader.

Touch Screen Calibration

Calibrating the Touch Screen

Guide on using the 'eGalaxTouch' tool for touch screen calibration.

Recovery Solution

Backup Procedure

Steps to back up the current Windows user environment using the recovery software.

Restore Procedure

Instructions for recovering the system from a backup, either to recent state or initial state.

Hardware Replacement and Separation

Storage (HDD/SSD) Replacement

Detailed procedure for safely removing and replacing the HDD/SSD tray and drive.

Card Reader Separation

Instructions for detaching the card reader, disconnecting its connector, and removing screws.

Stand Separation

Steps to safely detach and remove the device stand.