To Next PageTo Next Page
Need help?Do you have a question about the Hanbang HB7916 and is the answer not in the manual?
General| Brand | Hanbang |
|---|---|
| Model | HB7916 |
| Category | Network Hardware |
| Language | English |
Supports real-time audio and video stream recording for up to 16 IP cameras and network devices.
Avoid touching the power switch and NVR with wet hands or objects.
Ensure proper grounding to prevent interference and electrostatic damage.
Maintain stable power supply voltage and avoid direct shutdown via the main switch.
Prevent liquids or metal from splashing onto the NVR to avoid short circuits.
Properly install the hard disk before use; it is not included with the device.
Periodically clean dust to prevent short circuits caused by dampness.
Avoid hot plugging video/audio signal lines and interfaces to prevent damage.
Use the panel's off-button for safe shutdown to prevent hard disk damage.
The system detects and prompts for formatting unformatted hard disks automatically.
Avoid connecting NVR hard disks to PCs to prevent data corruption or formatting issues.
Do not open the NVR case while it is powered on to avoid electrical hazards.
Controls the NVR's power state, including startup, shutdown, and restart options.
Detailed steps for opening the case, placing, and securing the hard disk drive.
Instructions for connecting hard disk data and power cables to the drive slot.
Notes that SATA hard disks cannot be hot plugged and played.
Procedure for powering on the NVR and verifying the power indicator.
Steps for safely shutting down the system via menu or power button.
Details on default credentials and the process for logging into the system.
