What to do if HANCHU ESS HOME-ESS-HV-5.3K displays 'Discharge OCP'?
If your HANCHU ESS Inverter displays 'Discharge OCP', this indicates battery discharge over current protection. Please contact Hanchu ESS after-sales service department or your dealer directly.
What to do if my HANCHU ESS HOME-ESS-HV-5.3K Inverter displays 'Cell Imbalance'?
If your HANCHU ESS Inverter displays 'Cell Imbalance', it means the capacity of the battery is different. Please contact Hanchu ESS after-sales service company or your dealer directly.
What to do if my HANCHU ESS HOME-ESS-HV-5.3K displays 'Insulation Fault'?
If your HANCHU ESS Inverter displays 'Insulation Fault', it means the battery insulation has failed. Stop using the inverter and contact Hanchu ESS after-sales service company or your dealer directly.
What to do if my HANCHU ESS Inverter displays 'VoltSensor Fault'?
If your HANCHU ESS Inverter displays 'VoltSensor Fault', it means the battery voltage sensor has failed. Please contact Hanchu ESS after-sales service company or your dealer directly.
General| Model | HOME-ESS-HV-5.3K |
|---|---|
| Rated Power | 5.3 kW |
| Efficiency | 97.6% |
| Battery Compatibility | Lithium-ion |
| Weight | 37kg |
| Frequency | 50/60 Hz |
| Output Voltage | 230V |
| Battery Voltage | 48V |
| Protection | Overload, Short Circuit, Over Temperature |
| Communication | CAN/RS485 |
| Operating Temperature | -10°C to 50°C |
Explains the document's objective and intended use.
Identifies the primary readers of this user manual.
Defines hazard symbols and their meanings for safe operation.
Outlines fundamental safety rules for equipment operation.
Specifies requirements for individuals handling the equipment.
Details environmental conditions crucial for safe installation.
Covers safety measures for high voltage and electrical connections.
Advises on essential personal protective equipment and safe practices.
Addresses critical safety protocols for battery usage and management.
Explains the significance of various product safety and compliance labels.
Provides guidance for immediate actions during system emergencies.
Outlines the correct procedure for recycling and disposing of used batteries.
Lists relevant EU directives the product adheres to.
Details the individual parts that constitute the complete battery system.
Explains the nomenclature used for identifying system and module models.
Describes the energy capacity and scalability options of the system.
Provides dimensions and weight details for system components.
Illustrates and defines the function of each connection port.
Lists critical operational specifications and performance metrics.
Important information and checks before beginning installation.
Guidelines for selecting and preparing the installation location and system orientation.
Lists required tools and personal protective equipment for installation.
Inventory of all accessories provided with the battery system.
Detailed instructions for the physical assembly and mounting of the system.
Procedures for making all necessary electrical power and signal connections.
Instructions for preparing cables and ensuring proper system grounding.
Visual representations of single and parallel system electrical configurations.
Steps for establishing communication between system components and the inverter.
Procedures for powering up, testing, and connecting the HanchuESS mobile application.
Explains how to navigate and utilize the features of the intelligent touchscreen display.
Provides solutions for common operational problems and error conditions.
Specifies the ideal environmental parameters for battery storage.
Guidance on safely recharging batteries after deep discharge events.
Procedures to follow for maintaining battery health during extended non-use.
Critical safety protocols to ensure personnel and equipment safety during maintenance.
To Next Page
