USB Terminal Interface
Programs the scanner to work as a USB
Keyboard Device
IMAGETEAM
TM
3800, 3900, 4600, 4800, 3800r, 3800i Hand Held Linear Imager
USB Programming Bar codes - USB, Laptop, Suffi x, Trigger Modes, Factory Default
Keyboard Emulation
Programs the scanner to work without an external
keyboard.
TAB Suffi x
Programs the scanner to add a TAB key
function after each scan.
Carriage Return Suffi x
Programs the scanner to add an Enter
key function after each scan.
Clear all Suffi xes
Removes all suffi xes
Auto Trigger
Hands free, Scans continuously at full
power.
Note: NOT available in 4600 or 4800
Presentation Mode
Hands free, LED’s are off until a bar code is
presented.
Reread Delay = Medium
Sets a delay before the scanner can read the
same barcode again.
Note: for the 3800 and 3900 Only
Note: For 4600g, 4800i, 3800r, 3800i Only
Manual Trigger
Must press the trigger to activate the scanner
Factory Defaults
Resets your scanner to default settings.
USB PLUS-PS 09/20/06
Sample Code 39
Need help?
General
