Need help?Do you have a question about the Hand Held Products IT3800 and is the answer not in the manual?
General| Connectivity Technology | Wired |
|---|---|
| Interface | keyboard wedge; RS-232; USB |
| Operating Temperature | 32° to 122° F (0° to 50° C) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Drop Spec | Withstands multiple 5 ft. (1.5 m) drops to concrete |
| Humidity | 5% to 95% (non-condensing) |
Details the keyboard wedge connection setup for the scanner.
Process for setting the scanner's terminal identifier.
Continues the list of terminals supported by the scanner.
Configures word length, stop bits, and parity for serial data.
Configures serial communication handshaking protocol.
Adjusts the scanner's scan rate, affecting power consumption and performance.
Sets the volume level of the scanner's audible beeper.
Sets how the scanner is activated (manual, serial, or automatic).
Introduces adding data before or after scanned barcodes.
Step-by-step instructions for adding prefix or suffix data.
Procedures to remove single or all prefix/suffix data.
Configures intercharacter, interfunction, and intermessage delays.
Sets delay between character transmissions.
Sets delay between message segments.
Introduces editing scanned data using formats.
Steps to add a new data format to the scanner.
Details commands for editing data formats.
Explains how to use the data format editor.
Configures wand emulation for a secondary interface.
Lists available symbologies and general settings.
Enables or disables all supported barcode symbologies.
Configures handling of Code 39 check characters.
Configures handling of check digits for Interleaved 2 of 5.
Configures the number of check digits required for Code 11.
Configures transmission of the UPC A check digit.
Configures transmission of the EAN/JAN 13 check digit.
Configures transmission of the EAN/JAN 8 check digit.
Configures MSI check character handling.
Steps to copy scanner configuration and software to another scanner.
Overview of the Visual Menu software for scanner configuration.
Procedure to update the scanner's USB firmware using Visual Menu.
Maps function codes to ASCII values for terminals.
Details key mappings for various terminal types.
Adds a prefix with Code ID to all symbologies temporarily.
Explains syntax and notation used for serial commands.
Details the structure of serial commands for scanner configuration.
How to query scanner settings using serial commands.
Explains usage of Tag, SubTag, and Data fields in commands.
Serial commands to activate/deactivate the scanner trigger.
Procedure to restore the scanner's default settings.
Serial commands for terminal ID and keyboard configuration.
Serial commands for setting communication baud rates.
Commands for configuring RS-232 handshaking.
Commands for scan rate, beeper volume, tone, voting, quiet zone, and reread delay.
Commands to enable/disable barcode symbologies.
Commands for Codabar and Code 39 symbology settings.
Detailed technical specifications for the IT3800 model.
Pinout details for laser output interface cables.
Pinout details for keyboard wedge interface cables.
Pinout details for wand emulation interface cables.
Pinout details for serial output interface cables.
Pinout details for USB interface cables.
Periodic checks to ensure dependable scanner operation.
Step-by-step instructions to replace the scanner's interface cable.
Steps to diagnose and resolve common scanner issues.
Procedures for obtaining warranty or non-warranty service.
Accessing product service and repair information online.
Contact details for technical support offices worldwide.
To Next Page
