HandHeld ALGIZ RT10 - SD Card Insertion; Charging the Device

Version1.0 

3.2SDCardInsertion
ThistabletsupportsasinglemicroSDcardforsecondarystorage.SDcardslotisonbacksideoftablet,under
thebatterycoverasshowninfigure3.2,“SDCardSlot”.
OnceSDcardisinsertedsuccessfully,youcancheckitsdetailsin‐
Sengs→Storage→SDcard








3.3ChargingtheDevice 
Werecommendthatyoufullychargethebatterypriortofirstuse.AhighpowerUSBportisprovided;we
recommendthatthisisusedtochargethedevice.
Whenachargerisconnected,thechargingLEDonthedevicegivesavisualindicatorofthestateofcharge:
GreenLED Greenindicatesthatthebatteryisfullycharged(100%)
RedSolidLED RedSolidLEDindicatingBatteryischarging

Inrarecases,duringuse,thebatterymaydischargetoaveryweakstate.Insuchastate,whenauserattemptstoturn
onthedeviceusingthepowerbutton,thedevicemaynotrespond.Torecoverfromthis,connectthechargertothe
device.TheLEDwillthen
glowred,andstaythatwayforafewminutes.Thedevicewillthenbootintochargingmode.
 