Handicare 1100 - Technical Specifications

USER MANUAL | 17
EN
1
The carrying out of alterations to the product is not permitted and doing so will invalidate
the warranty. The manufacturer is not liable for damage resulting from such alterations.
The manufacturer accepts no liability for damage or injury caused by the non or
inadequate observance of the safety regulations and instructions in this manual, or by
negligence during the installation, use, maintenance and repair of this stairlift.
Installation and servicing should only be carried out by dealers or installers/service
engineers authorised by the manufacturer in accordance with local regulations.
The wall mounted remote controls operate on a infrared frequency; Handicare is
unable to accept responsibility for system inoperability in the unlikely event of
interference from signals external to this stairlift.
TECHNICAL SPECIFICATIONS
Supply voltage 100-240 V
~
Speed max. 0.15 m/s
Frequency 50/60 Hz Ambient temperature 0 - 40 °C
Current 1.0 A Relative humidity 20 - 80%
Power consumption 0-36 watt Usage 10 rides per day
Fuses 20 A
Max.load (
inclination 25
0
-45
0
) 140 kg Noise 56 dB
Max.load (
inclination 45
0
-50
0
) 130 kg Use Indoor
Max.load (SlideTrack) 120 kg
TECHNICAL SPECIFICATIONS NA
Supply voltage 120 V
~
Speed max. 0.49 f/s
Frequency 60 Hz Ambient temperature 32 - 104 °F
Current 0.83 A Relative humidity 20 - 80%
Power consumption 20 watt Usage 10 rides per day
Fuses 20 A
Max.load (
inclination 25
0
-45
0
) 308 lbs Noise 56 dB
Max.load (
inclination 45
0
-50
0
) 286 lbs Use Indoor
Max.load (SlideTrack)
264 lbs
The information provided in this manual is based on general specifications regarding the construction, material properties
and working methods known to us at the time of publication; alterations and improvements are therefore anticipated.
All rights reserved. No part of this publication may be reproduced and/or published by means of print,
photocopy, microfilm or in any other way or form, without prior written permission from the manufacturer.
This also applies for the accompanying drawings and diagrams. The manufacturer reserves the right to
change parts at any time, without prior or direct notification to the customer. The contents of this manual
may also be changed without prior warning. This manual is intended for the standard models of the lift. The
manufacturer therefore cannot be held liable for any damage resulting from specifications that differ from
those of the standard model of the lift supplied to you. For information concerning adjustment,
maintenance or repairs not provided in this manual, please contact your supplier's service department.
This manual has been compiled with the best intentions and every possible care but the manufacturer
cannot accept responsibility for any errors in this manual or for the consequences thereof.
The Dutch manual is the original language.