Handicare 4000 - Batteries Rc; Power

1
15
30
45
USER MANUAL | 21
EN
BATTERIES RC
POWER
Problem: the lift does not travel in either direction and the LED on the remote control
does not light up when the remote control is operated.
Cause: the batteries in the remote control are flat.
Solution: replace the batteries in the remote control.
Problem: the lift batteries are not recharging, the lift beeps for 15 seconds and the
display shows a “2”.
Cause: the lift is not in the correct position at a charge point or the plug is not in the
socket.
Solution: move the lift to a charge point or put the plug in the socket.
15 sec.
CAUSE
RED light
CAUSE
SOLUTION
SOLUTION