P
ActionDisplay
F A U L T
Sleeping mode
USER MANUAL | 29
EN
Power supply fault during
charging
Main board hardware fault
Sleeping mode
Power supply fault during
charging
Power supply fault when battery
on float
Over current Sleeping mode
Display
Display
Display
Display Display
Display Display
Action
Action
Action
Action Action
Action Action
FAULT
FAULT
FAULT
FAULT FAULT
If the display is showing anything but the diagnostic codes
listed it requires resetting: drive the lift off the charge
contacts. Turn the main switch on the unit unit off for
10 seconds and then back on.
To Next Page
Loading...
