Do you have a question about the Handicare Minivator Simplicity 950 Series and is the answer not in the manual?
Type | Straight Stairlift |
---|---|
Battery Backup | Yes |
Foldable Seat | Yes |
Foldable Armrests | Yes |
Installation | Professional installation required |
Seat Width | 460mm (18 inches) |
Speed | 0.15 m/s |
Foldable Footrest | Yes |
Swivel Seat | Yes |
Safety Sensors | Yes |
Seatbelt | Yes |
Track Length | Variable, made to measure |
Ensure stairs clear, arms/footplate/seat down, and fasten safety belt for safe operation.
Located on lift; should be in 'ON' position for charging and operation.
Secures stairlift; recommended to turn off when not in use.
Controls stairlift movement by pressing in desired direction; stops when released.
Used to call lift to either end of stairs or operate powered hinges.
Shows fault codes to help diagnose issues; refer to Appendix 1.
Red button stops all powered features; press again to restore operation.
Allows easier mounting/dismounting by swiveling seat to landing.
Seat automatically swivels when stairlift reaches top and toggle is held.
Seat, armrests, and footrest fold for easier passage when not in use.
Footplate automatically folds away when seat squab is lifted.
Footplate operation controlled by rocker switch under armrest.
Explains operation for moving the track out of the way at the foot of stairs.
Move stairlift to park position away from stairs to prevent obstruction.
Procedure to manually move the track in emergencies using a spanner.
Explains how the powered hinged track automatically folds away.
Describes manual hinged track operation, requiring it to be lowered first.
Steps for manually winding the lift during a total power failure.
Safety edges stop lift if objects trapped; reverse lift to clear.
Advised after 12 months, then every 12 months by a competent person.
Lists crucial safety rules: user limits, proper use, environmental care.
Keep stairlift on charging points when not in use to maintain battery.
Wipe clean with damp cloth and mild detergent; avoid abrasives.
Dispose according to WEEE directive for environmental recycling.
Details fault codes and self-help actions for troubleshooting.
Provides schematics for PCB connections and switch functions.
States product compliance with EU directives and standards.