Handy Home Products 16628 User Manual (English)

To Next Page

COMBINATION 8X8 and 10X8 FLOOR KIT

This floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor size

This floor kit is for 10’ x 7’ 8-5/8” and 8’ x 7’ 8-5/8” buildings. Please refer to the appropriate pages

of this instruction manual to build the floor size needed. If constructing an 8X8 storage building,

you will have additional material which can be used to construct a shelf (some cutting required)

or other projects.

07/31/2006

#16628

Important! Please follow these instructions. This kit may be different from the one specified in instruction booklet.

- BEFORE YOU BEGIN -

 First...

Read these instructions thoroughly before you begin

assembly. Assembly is easiest if you follow the steps in

the order shown.

Lumber is graded from only one side. Check the part for

the most attractive face and make sure to face it to the

outside.

 Check all parts

Compare parts you have to the list on page 2. If a part is

missing, circle the part in question in the parts list and

call us toll-free at 1-800-437-0784.

 Assistance required

We recommend that you assemble this floor on level

ground in the location it will be used. Assistance is

necessary to handle, fit, and secure some components.

Two people maybe needed for some steps.

 Squareness is very Important!

Keeping all 90° corners and 90° perpendiculars square

throughout the assembly of this floor kit will make each

succeeding step easier and is necessary to assure that

all components fit together properly.

 Check local zoning

Before starting construction, check with your local

building code official for any required permits, variances,

etc.

 Check floor kit size

Before starting construction on your floor, make sure

that you check in the instruction manual to ensure that

you are building the correct size floor kit for your

building.

Always wear OSHA-APPROVED safety

glasses throughout assembly process

■ Tools required

❑ Hammer

❑ Level

❑ Pencil

❑ Tape Measure

■ Optional tools

❑ Chalk Line

❑ Square

❑ Nail Pouch

❑ Saw

8x8

See pages 2-3-4

FOR MARCO SERIES, SOLAR SHED AND MWP IMPERIAL ONLY

10x8

See pages 5-6

Need help?

Do you have a question about the Handy Home Products 16628 and is the answer not in the manual?

Handy Home Products 16628 Specifications

General

Brand	Handy Home Products
Model	16628
Category	Household Appliance
Language	English

Summary

Before You Begin

Read instructions thoroughly

Read all instructions thoroughly before beginning assembly for easiest process.

Check all parts against list

Compare kit parts to the list on page 2. Contact manufacturer if any parts are missing.

Assistance required for assembly

Assembly requires assistance for handling and securing components; two people may be needed.

Importance of squareness

Ensure 90° corners and perpendiculars are square throughout assembly for proper fit.

Check local zoning requirements

Before construction, check local building codes for permits and variances.

Verify correct floor kit size

Confirm the correct floor kit size in the manual before starting construction.

Wear safety glasses

Always wear OSHA-APPROVED safety glasses throughout the entire assembly process.

8x8 Floor Frame Assembly

Position Floor Joists and Bond Boards

Position floor joists and bond boards as shown, securing with nails at 24” spacing.

Position and Square Completed Frame

Position the completed frame at the site, level it, and ensure it is square by measuring corners.

Floor Panel Attachment

Attach floor panels to the assembled frame, ensuring they are flush and secured with nails.

8x8 Optional Shelf Instructions

Prepare Shelf Parts

Cut specified boards and panels to create the necessary components for the shelf.

Assemble Shelf Frame

Assemble the shelf frame by attaching cut boards to the main shelf board using nails.

Install Shelf

Install the assembled shelf frame onto the building's back wall brace and secure it to the studs.

10x8 Floor Frame Assembly