EasyManua.ls Logo

Hangar 9 Ultra Stick 60 User Manual

Hangar 9 Ultra Stick 60
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hangar 9 Ultra Stick 60 and is the answer not in the manual?

Hangar 9 Ultra Stick 60 Specifications

General IconGeneral
BrandHangar 9
ModelUltra Stick 60
CategoryToy
LanguageEnglish

Summary

Introduction

R/C Aircraft Safety Warning

Critical safety advice on R/C aircraft misuse, operation, and flight locations.

Section 1: Assembling the Conventional Wing

Section 1a: Assembling the Quad Flap Wing

Section 2: Joining the Wing Halves

Section 3: Installing Aileron and Flap Servos

Section 4: Attaching Wing to Fuselage

Section 5: Installing the Horizontal Stabilizer

Section 6: Installing the Vertical Stabilizer (Fin)

Section 7: Installing Rudder and Tail Wheel Assembly

Section 8: Hinging Horizontal Stabilizer and Elevator

Section 9: Installing Rudder and Elevator Control Horns

Section 10: Installing Main Landing Gear

Section 11: Assembling the Fuel Tank

Section 12: Mounting the Engine

Section 13: Installing the Radio System

Section 14: Installing Aileron/Quad Flap Linkages

Section 15: Installing Pushrods for Control Surfaces

Section 17: Balancing the Ultra Stick 60

Section 19: Radio Programming Guide

Programming JR XP652/642 Transmitters

Step-by-step instructions for programming quad flap functions on JR XP652/642 radios.

Programming JR XP783/XP347/XP388S Transmitters

Programming JR XP8103 Transmitter

Programming JR 10X/10SXII/10SX Transmitters

Programming Futaba 8UA/S Transmitter

Range Test Your Radio

AMA Safety Code

General Safety Rules

Core safety rules for model aircraft operation, including altitude and site rules.

Radio Control Safety Guidelines

Safety guidelines for R/C operations, frequency use, and pilot qualifications.

Related product manuals