Hangzhou Ruideng Technology Co., Ltd. DPS3005

To Next Page

Hangzhou Ruideng Technology Co., Ltd.

OPERATING MANUAL

DPS3005 Digital Power Supply Upper Computer

(For Win7 and above)

1 Communication Board Connetion

1.1 Wire Communication Board Connection

Open data package, double click CH341SER.EXE and install drive

program of communication board.

After installation, please use the attach cable to connect

digital power supply with communication board, and use USB cable to

connect Micro UBB port with PC.

Digital power supply communication data setting:

Keep pressing ↑button to power on, then enter into data setting

interface. Press ↑or↓ to choose data, then press knob to adjust the

value. After adjustment, press twice shortly SET key to exist data

setting, and those data are stored automatically.

COMM: Communication stitch setting, ON represents opening

communication, OFF represents closing communication.

ADDR: Digital power supply address code, range 001-255.

BAUD: Communication baud rate, 2400,4800,9600,19200 adjusting.

BPIN: Bluetooth PIN Code Pairing, 0000-9999, useless for wire

communication.

Main Page

Need help?

Do you have a question about the Hangzhou Ruideng Technology Co., Ltd. DPS3005 and is the answer not in the manual?

Summary

Communication Board Setup

Wire Communication Setup and Data

Guides connection via USB and setting communication parameters for wired operation.

Bluetooth Wireless Communication

Details connecting via Bluetooth, PC pairing, and wireless operation.

PC Software Installation and Operation

PC Software Installation Guide

Instructions for downloading, unzipping, and installing the control software on a computer.

Software Operation and Basic Functions

Overview of launching the software and using its main interface for basic control.

Advanced Software Features

Explains advanced functions like data groups, auto-tests, and scanning.