To Next PageTo Next Page
Need help?Do you have a question about the Hanhart SPECTRON and is the answer not in the manual?
Details operating temperature ranges and battery life indicators for the stopwatch models.
Outlines display features, digit count, and measurement units for different stopwatch models.
Specifies stopwatch weight, accuracy rating, and the material used for the case.
Provides details on the 3-year warranty against defects in material and workmanship.
Details the primary functions available for E 100, E 200, and SPECTRON stopwatch models.
Explains the purpose and operation of the four main keys: START/STOP, SPLIT/LAP, MEM/SET/DISP, MODE.
Guides on how to reset the watch and change operating modes for different functions.
Instructions for measuring times using LAP, S-LAP, or TIME functions and storing them.
Details the Event-Counter function and how to advance the Split Time for synchronization.
Explains how to access and view stored time measurements from the stopwatch memory.
Guides for setting up and using the Count Down and Pacer functions on the stopwatch.
Step-by-step instructions for setting the current time and date on the stopwatch.
Detailed instructions for setting the Count Down and Pacer values for specific models.
How to toggle and set the measurement units (seconds or minutes) for the SPECTRON model.
Explains the interpolation process for Pacer values and provides a conversion table.
General
