Loading the Batteries
Push open the battery caver. lnsert two
AA
srze
alkalrne batterres
wrth
correct + and - arder
as
rndrcated on the insrde of the battery caver
NOTE:
•
Remove the batteries from the camera if
it
rs
not to
be
used for an
extended period. This
will reduce the possibility
of
battery leakage.
• Always replace bath batteries
at
the same time
Powering Up
Slide the lens caver switch tully apen to switch
on
the power. Closing the
lens caver switch cuts off ali power and locks the shutter butten.
DX Film Speed Setting
This camera has the
DX
system of automatrc film speed setting. For
DX
frlm
speeds below ISO 400
thrs
camera will set itself
to
ISO 100. For
DX
films
of
ISO 400 and above
it
will set itself
to
ISO 400 For non-
DX
frlm
rt
will set itself to ISO 1 00.
2
To Next Page
Loading...