6. The flash lires automatically when light
is
insufficient. See
Built-ln
Flash.
7. The film will automatically wind onto the next frame when the shutter
button
is
released.
8. Close the lens caver whenever camera
is
not needed.
Built-ln Flash
1.
Before shooting with the flash, make sure the subject
is
within the
proper
flash shooting range for the film in use.
ISO Flash
Sh
o
ot
i
ng
Range
100
0.9-3
m
(3~-
10ft.)
400
0.9-
6 m (3 - 20ft.)
2. Auto Flash
This mode will charge the flash automatically when available light
is
insufficient and eut flash off when light
is
sufficient. The
OK
indicator
wi
ll
not light
up
before flash
is
tully charged. The flash will lire
automatica
ll
y when you take pictures
in
low light conditions.
5
To Next Page
Loading...