To Next PageTo Next Page
Need help?Do you have a question about the HANLI HL-30000 Series and is the answer not in the manual?
Specifies that operations must be performed by trained personnel.
Warns about serious injury or death from contact with electrical parts.
Advises keeping body parts away from high-temperature areas to prevent burns.
Details requirements for power supply selection, cabling, and grounding.
Instructs to cut off power 3 minutes before maintenance.
Prohibits use beyond specifications to avoid accidents.
Forbids installation in dangerous places with flammable gas.
Warns against running the equipment without its cover due to electrical shock risk.
Warns against water ingress, which can cause short circuits and electric shock.
Emphasizes taking safety precautions when alarms are active.
Advises securing equipment firmly during transport and installation.
Ensures power cable matches overload protection devices.
Advises stopping operation if abnormality is unclear to prevent damage.
Prohibits inserting body parts or objects into equipment gaps during operation.
Advises ventilation and avoiding skin contact with leaked refrigerant.
Explains how to connect the chiller to the laser system, including pipe size and resistance.
Provides guidance on wiring, power cord selection, and grounding.
Guides on how to set parameters for the integrated controller.
Guides on how to set parameters for the split controller.
General