17
16
FUNCTIONAL DESCRIPTION HFUNCTIONAL DESCRIPTION H
FUNCTIONAL DESCRIPTION HFUNCTIONAL DESCRIPTION H
FUNCTIONAL DESCRIPTION H
I I
I I
I
96229622
96229622
9622
1) BNC socket for combination pH or ORP electrode.
2) LCD display.
3) RANGE to select the pH, °C or mV range.
4) UP arrow to set the month and day for calibration data
recall and the temperature for manual compensation (when
the temperature probe is disconnected).
5) CAL to enter calibration mode.
6) Socket for temperature probe HI 7669/2W.
7) ON/OFF to switch the instrument on or off.
8) DOWN arrow to set the month and day for calibration data
recall and the temperature for manual compensation (when
the temperature probe is disconnected).
9) CFM to confirm calibration data.
HI 931000
Range pH 0.00 to 14.00
°C 0.0 to 70.0
Resolution pH 0.01
°C 0.1
Accuracy pH ±0.01
(@20°C/68°F) °C ±0.5
Typical EMC pH ±0.30
Deviation °C ±1
pH Calibration Automatic 2 point with
3 memorized standard buffers
(pH 7.01, 4.01, 10.01)
Temperature Automatic from 0 to 70°C
Compensation (32 to 158°F)
Electrode HI 1217D combination 4-in-1 gel
pH electrode with built-in temperature
sensor and amplifier (included)
Battery Type 1 x 9 volt
Life 300 hours of continuous use
Auto-off after 8 minutes of non-use
Environment 0 to 50°C (32 to 122°F);
max 95% RH non-condensing
Dimensions 143 x 80 x 38 mm
(5.6 x 3.2 x 1.5")
Weight 360 g (12.7 oz.)
SPECIFICATIONS HI 931000SPECIFICATIONS HI 931000
SPECIFICATIONS HI 931000SPECIFICATIONS HI 931000
SPECIFICATIONS HI 931000
To Next Page
Loading...
Need help?
General
